• How To Drain & Re-Fill Your Hot Tub

    How To Drain & Re-Fill Your Hot Tub

    The best time to replace your hot tub water is before the busy season hits. Doing this now will help you get through the next few months without having to drain & fill your hot tub when you want to use it. It’s also a great opportunity to inspect your hot tub and its components for any signs of damage and wear. Making any necessary repairs and doing some preventative maintenance will save you from having to do an emergency repair later!

     

    Here’s a step by step approach for getting your hot tub ready for the busy season.

    THE LET GO – Easy as 1, 2, 3

    STEP A: Remove & Soak

    To remove the MICROFILTER™, twist the trim ring counter clockwise to unlock it and remove along with the floating weir assembly. Lift out the basket, and pull out the MICROFILTER™. Remove debris from the basket and rinse. Soak the MICROFILTER™ in Beachcomber’s FILTER SOAK™ cleaner and when finished, rinse thoroughly with a spray nozzle to remove residue.

    FILTER SOAK is an environmentally friendly Ecologo® certified, one-shot, fast acting, alkaline detergent cleaner, which removes organic contaminants and improves the performance of your MICROFILTER™. For best results use in conjunction with a BEACHCOMBER™ Cleaning Canister.

    STEP B: Cleanse & Neutralize

    Before draining your hot tub, simply add Beachcomber’s PIPE CLEANSE™ to your hot tub water and let the product circulate for at least 12 hours. This product flushes out an amazing amount of biofilm and bather waste from pipes, leaving a cleaner hot tub for a better experience. Test water for any sanitizer level and if present add NEUTRALIZER as directed to allow for environmentally safe dumping of water.

    DID YOU KNOW?

    The average BEACHCOMBER HOT TUB can have up to 250’ of plumbing lines. Keep them clean by using PIPE CLEANSE before you drain your hot tub.

    PIPE CLEANSE is a very effective pipe cleaner that is formulated to loosen and dislodge biofilm deposits deep in the internal water lines of your hot tub just before draining. For best results, follow directions on the label.

    NEUTRALIZER completely neutralizes active chlorine or bromine in hot tub water, making it safe and environmentally friendly to drain. It is concentrated and will instantly neutralize, or reduce your sanitizer level. Always, follow the directions on the label.

    STEP C: Drain & Clean

    Turn power off at the breaker or power disconnect switch. Locate the black DRAIN & FILL valve, found inside behind the door on a portable LEEP™ model or under the step on the Hybrid3™ Edition. Remove the safety cap from the fitting threaded into the valve.

    Attach the female end of your garden hose and place the other end at a level lower than the DRAIN & FILL valve to ensure complete draining.To open, turn the outer part of the DRAIN & FILL valve counterclockwise to open and start the draining. Draining time will vary from model to model. Once the hot tub is drained and empty, disconnect the garden hose and close the valve.

    While the water is draining is the perfect opportunity to protect your Beachcomber HEATSHIELD™ with COVER CARE. Prepare exterior cover surface by cleaning dirt and grime off with a mixture of warm water and a very mild detergent, using a soft cloth. Thoroughly rinse and allow to dry. Spray COVER CARE generously over entire exterior cover surface until wet. Wait 30 seconds, then wipe dry and buff with a clean absorbent cloth, removing any excess. Reapply COVER CARE at least once a month to ensure optimal protection.

    When water is drained down to the footwell is the ideal time to wipe down the acrylic shell with TUB CLEAN and HOT TUB CHAMOIS™. Rinse well with fresh water making sure the DRAIN & FILL valve of the hot tub is still open so that residue drains out. This helps to rid the hot tub of any contaminants that have ended up in the low lying plumbing lines.

    COVER CARE is a concentrated, EcoLogo® certified, liquid revitalizer and UV protectant that is ideal for all types of hot tub covers, as well as vinyl products around the home, including patio furniture and vinyl on vehicles.

    TUB CLEAN is a fast acting, EcoLogo® certified, non-abrasive biodegradable surface cleaner for the removal of scum lines and grease build-up on hot tub surfaces as well as many other sensitive home and auto applications.

    HOT TUB CHAMOIS™ is the fastest, safest way to a streak free clean hot tub. This super absorbent, non-abrasive, ultra soft cleaning tool will make your hot tub shine like new.

    THE GET GO – Easy as 1, 2, 3

    STEP 1: Fill & Eliminate

    Close the DRAIN & FILL valve. Using the FRESH FILL™ pre-filter attached to your garden hose start filling up the hot tub. Once hot tub water is up past the skimmer, you are now safe to turn on the power.

    After the hot tub is circulating with all bubbles out of the lines, add ELIMINATE™ to protect your hot tub from corrosion.

    FRESH FILL™ hot tub pre-filter easily connects to your garden hose and works with all hot tubs. It utilises food grade activated carbon and proprietary filtration media for the removal of metals, volatile organic compounds and suspended solids before they reach your hot tub.

    ELIMINATE™ is a liquid concentrate formulated to prevent and inhibit corrosion on hot tub surfaces, fixtures, and equipment. Add an entire 500 mL bottle at every hot tub start-up.

    STEP 2: Accessorize & Heat

    This is the perfect time to replace your hot tub accessories such as FILTER SAVERS and HYDRO MOP and turn up the heat so you and your family can be soaking away blissfully in a few short hours.

    HYDROMOP™ absorbs unwanted oils and residue from your hot tub water to ensure the optimal water clarity and keep water lines clean.

    FILTER SAVERS™ are made from a fine nylon material which traps leaves and debris which reduces maintenance and extends the life of your MICROFILTER™.

    STEP 3: Test & Balance

    Nothing is more important than testing your hot tub water and ensuring everything is perfectly balanced for bather comfort and water care product efficiency.

    TEST STRIPS  are the fastest and easiest way to test your hot tub. You should test at least 2 times per week and after each use.

    RESIST™ helps water to resist changes in pH, and increases the total alkalinity of hot tub water to prevent pH fluctuations. Maintain a proper Total Alkalinity (TA) level of 100 – 120 ppm

    PROTECT™ helps protect hot tub equipment and parts from etching by increasing the calcium level of hot tub water. Maintain a proper calcium hardness (CH) level of 150 – 200 ppm

    pH PLUS effective for minor pH increases of hot tub water to prevent corrosion and eye/skin irritation and increase sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8

    pH MINUS effective for minor pH decreases of hot tub water to prevent scaling, cloudy water and eye/skin irritation and increases sanitizer efficiency. Before adjusting pH, ensure your Total Alkalinity is balanced. Maintain a proper (pH) level of 7.2 – 7.8

     

    Where to get everything you need? Beachcomber’s DRAIN & FILL TOTE has absolutely everything you need to drain and re-fill your hot tub in style! 

     

     

    Drain & Fill

SEARCH
Sign Up For Our Monthly Newsletter
OUTDOOR LIVING REIMAGINED.

For over 40 years, Beachcomber Hot Tubs has been the choice for families everywhere looking to relax, re-connect, and escape in the comfort of their own backyards. Discover the latest design and landscaping tips, owner hot tub troubleshooting and maintenance how-to, and get all your questions answered about what life is like when you invest into your health and happiness with a quality outdoor hot tub.

Follow me on Twitter
×

Sign Up for Our Monthly Newsletter