Any time you’re preparing for a period of heavy use of your hot tub, it’s always good to give your water a refresh. Draining and re-filling your hot tub is a practice you should follow at least 3-4 times a year, and if you’ve got plans this summer for a backyard blow-out that involves your guests taking a soak inside your Beachcomber, now might be the time.
Here’s a quick guide to get your hot tub all set for your guests:
STEP 1: Fill & Condition
After you’ve drained the tub, ensure the DRAIN & FILL valve is closed and the GUILLOTINE valves are open. Using the FRESH FILL™ pre-filter attached to your garden hose start filling up the hot tub. Once hot tub water is up past the skimmer, you are now safe to turn on the power at the GFCI. Turn on FLEXJET Pump and open air control dials to purge any air out of lines.
After the hot tub is circulating with all bubbles out of the lines, add ELIMINATE™ to protect your hot tub from corrosion and mineral build-up. Then add a weekly dose of ELIMINATE PLUS™ to sequester metals and prevent staining, PUREZYME™ to prevent scum build-up and PURE BLUE™ to prevent cloudy water and give water a sparkle; Or add a dose of CARE FREE which is Beachcomber’s weekly 4-in-1 conditioner. More on CARE FREE Water Care System™ here. [Linked]
STEP 2: Heat & Accessorize
To start your hot tub water for the first time, it’s best to start in the evening to allow the conditioning products the time they need to do their job overnight and make sure everything is set for the arrival of your guests. Once your hot tub is running and circulating it is the perfect time to add or replace your hot tub accessories such as FILTER SAVERS and HYDRO MOP and turn up the heat so you and your family and friends can be soaking away blissfully in a few short hours. The hot tub will begin to heat to your pre-set temperature or 100F (38° C) as a factory pre-set temperature. For extra comfortable silky smooth water, add a dose of SOFT™ to your water, your friends and family will notice, particularly if anyone is prone to dry skin issues.
STEP 3: Balance & Sanitize
Nothing is more important that testing your hot tub water and ensuring everything is perfectly balanced for bather comfort, water care product efficiency and hot tub equipment longevity. Use your Beachcomber test strips to determine your water care balance requirements.
Add your Sanitizer/Oxidizer (Cl) or (Br) – 3 – 5 ppm – Use a Beachcomber BOOST or BLAST product. Refer to the sanitizer/oxidizer program that you are using for your hot tub, treat the water by distributing your oxidizer directly into the circulating heated water, and wait 15 minutes for the relaxation to commence.
STEP 4: Ensure Everything is Looking It’s Best
While you are preparing your hot tub water, now is also the perfect time to ensure that your Beachcomber HEATSHIELD™ is also looking it’s best! Nobody wants to see a dirty, or worse smelly, hot tub cover, and while our patented HEATSHIELD™ products have been made to withstand the elements and test of time, they also need a little love. For the perfect results, prepare the exterior cover surface by cleaning dirt and grim off with a mixture of warm water and a very mild detergent. Thoroughly rinse and allow to dry. Spray Beachcomber’s COVER CARE generously over entire exterior surface until wet. Wait 30 seconds, then wipe, dry, and buff!
STEP 5: Add Some Party Favors!
To add more fun to the backyard party, check out a few of our favourite hot tub accessories that are perfect for a summertime get together!
The limited-time only Summer Special Edition Hot Tubs have just arrived with up to $5,977 in savings, featuring Beachcomber’s largest capacity models fully-loaded with enhanced features for the perfect backyard destination!