Simplicity is Beautiful Thing…
Beachcomber’s Care Free products have been engineered for your Beachcomber Hot Tub to create an extraordinary experience every time you step into your tub.
Blended with multi-functioning purpose in mind, Care Free treats your water so it’s fresh and crystal clear without all the harsh chemicals. Care Free replaces traditional water care products such as sequesterants, water clarifiers and calcium increasers; making it safer for your family and the environment while saving you money.
Starting up your hot tub using Care Free
Based in a hot tub volume of 1000 liters
Step #1 – Once your hot tub is filled with water, ensure that the knife valves in the equipment area are in the open position to allow water to flow. Ensure that the bottom drain valve is closed.
Step #2 – Turn on the main breaker to the hot tub. Turn the jets off and on several times until the bubbles purge out of the lines and the hot tub is running. It will heat to the default of 100F.
Step #3 – add one full bottle of ELIMINATE to the circulating hot tub, and wait 15 minutes. See bottle for details.
Step #4 – Test the pH with your test kit to ensure it is from 7.2 to 7.8 ppm. Balance pH, Total Alkalinity (TA), and Calcium Hardness with your balancing tote. (pH MINUS, pH PLUS, PROTECT, RESIST)
Step #5 – Add 20 grams (approx. 1 tbsp.) of CARE FREE BOOST to the center of the circulating hot tub — wait 15 minutes before proceeding.
Step #6 – Add 75 grams of CARE FREE to the skimmer with circulation system running.
Step #7 – Test your water for pH, TA, sanitizer and adjust parameters if necessary.
Beachcomber Hot Tip! Have a computerized water test completed by your local Beachcomber Professional.